Explosion-proof lamp before use, first to check whether the content of the nameplate with customers ordering consistentInquiry
The use and maintenance
1.Explosion-proof lamp before use, first to check whether the content of the nameplate with customers ordering consistent;
2.Mixer explosion-proof lamp when installed into the first line cable by introducing device received by XianQiang terminals, and pressure sealing ring, cable seal is good, then good grounding line, fastening screws, the above after the check and correct, can use electricity;
3.Explosion-proof lamp shall not remove, maintenance, must be disconnected before level power supply after can open access; Generally do not need to repair this product has long life characteristics.
4.Pieces shall not damage the flame-proof surface in the process of maintenance, repair after tu rust-proof oil 204-1, good cover, tighten rear can use;
5.Explosion-proof lamp should be regularly check, clean up the dust on the surface of the transparent.
6.Mixer obstacles from the explosion-proof enclosure is greater than 30 mm.
1.Please select product according to the model description carefully, for example, product model is BLED86D □ -40X if you need explosion-proof LED lamp 40W, ceiling type installation;
2.Power supply and light source have been prepared along with the lamp.
3.Stainless steel mesh enclosure is optional.
4.It is suitable for strong vibration atmospheres after anti-shock treatment.
5.Light angles 270° and 30° are optional.
6.Please give clear indications if need abovementioned items 3,4 and 5 before leaving the factory.
Main technical parameters