It is applicable for explosive gas or steam atmospheres of CAT II A, IIB and IIC, temperature classification from T1 to T6, is mainly applied to Zone 1 and Zone 2 hazardous locations indoors and outdoors, or explosive or combustible d\ist atmospheres Zones 20,21 and 22, used for lighting indoors and outdoors.
Inquiry
Application
It is applicable for explosive gas or steam atmospheres of CAT II A, IIB and IIC, temperature classification from T1 to T6, is mainly applied to Zone 1 and Zone 2 hazardous locations indoors and outdoors, or explosive or combustible d\ist atmospheres Zones 20,21 and 22, used for lighting indoors and outdoors.
Normal working conditions
1.Altitude of the installation site shall not beyond 2000m;
2.Ambient temperature should be within -40^0 ?+40*C, average temperature within24h shall not exceed +3 51C;5.It is applicable for explosive gas atmospheres Zones 1 and 2, CAT II A, IIB and IIC, and temperature classification from T1 to T6.
Product structure performance
1.Explosion-proof lamp before use, first to check whether the content of the nameplate with customers ordering consistent;
2.Mixer explosion-proof lamp when installed into the first line cable by introducing device received by XianQiang terminals, and pressure sealing ring, cable seal is good, then good grounding line, fastening screws, the above after the check and correct, can use electricity;
3.Explosion-proof lamp shall not remove, maintenance, must be disconnected before level power supply after can open access; Generally do not need to repair this product has long life characteristics.
4.Pieces shall not damage the flame-proof surface in the process of maintenance, repair after tu rust-proof oil 204-1, good cover, tighten rear can use;
5.Explosion-proof lamp should be regularly check, clean up the dust on the surface of the transparent.
6.Mixer obstacles from the explosion-proof enclosure is greater than 30 mm.
Order note
1.Please select product according to the model description carefully, for exanq>le, product model is BLED86D □ -40X if you need explosion-proof LED lamp 40W, ceiling type installation;
2.Power supply and light source have been prepared along with the lamp.
3.Stainless steel mesh enclosure is optional.
4.It is suitable for strong vibration atmospheres after anti-shock treatment.
5.Light angles 270。and 30。are optional.
6.Please give clear indications if need abovementioned items 3,4 and 5 before leaving the factory.
Main technical parameters
